Flexible heated hoses

Applications
Flexible heated hoses are used as connectiing parts
between fixed and moving machine parts when it is
vital to maintain these at constant temperature.
Gluing applications, hotmelt adhesive installations,
the food industry, labeling machines, polyurethane
foam spraying installations, oil burner conduits, gas
sampling conduits for measuring purposes, etc.
To ensure that these heating elements enjoy a long
service life, we recommend using a control device.

Characteristics
• Temperature range : 100°C, 200°C and 250°C.
• Hose : PTFE reinforced with a stainless
steel braid.
• Heating cable : PTFE insulation with braid.
• Temperature sensor : PT 100 or thermocouple J or K.
• Heat insulation : Silicon foam.
• Outer sheath : Polyamide braid.
• End-pieces : Silicon caps with device to protect
output cable from being ripped out.
• Voltage : 230 V, other on request.
• Connection : Revolving nuts, UNF, BSP/DKR
connections, or with smooth

end-pieces.

Options
• Stainless steel connections.
• Outer stainless or galvanised steel braid.
• Pilot lines can pass through the heated hose.
• Special designs on request.

Nominal diameter (mm) 4 6 8 10 13 16 20 25
External diameter (mm) 40 40 40 40 40 40 59 59
Power (W/m) 80 90 100 150 170 200 280 300
Burst pressure (bar) 1000 900 800 600 500 400 280 220
Max. service pressure
Up to 4°C (bar) 250 225 200 150 125 100 70 55
Up to 100°C (bar) 225 202 180 135 112 90 63 49
Up to 200°C (bar) 200 180 160 120 100 80 56 44
Minimum bend
with polyamide braid (mm) 160 160 160 250 250 250 450 500
Minimum bend
with metal braid (mm) 200 200 200 290 290 290 500 550

Electronic regulator option
Two-point regulator with fuse protection and ON/OFF indicator

 Use
Consult the pages of the catalogue devoted to the
corresponding general operating principles, general
instructions for use and accessories.